PF80L2
Inline stage 2 for a 750 W motor when the ratio must be above 9. Rated torque reaches about 100 N·m. Check peak torque at 2 × rated.
- 80Flange
- Stage 2 L2Stages
- InlineMounting
- Follows input flange and shaftReference length
What this unit does
For the MSP750 integrated drive. The input is a clamp hub; do not add a coupling. In the software, enter the ratio in the travel conversion: revolutions × ratio = output revolutions.
| Item | Value |
|---|---|
| Series | PF80L2 |
| Matched motor | 750 W servo / 80 frame |
| Rated input speed | 3000 r/min |
| Backlash | ≤12 arcmin |
| Efficiency | about 92% |
| Noise | ≤60 dB |
| Lubrication | Synthetic grease, maintenance-free |
| Mounting | Any orientation |
Ratio and rated torque
Check peak torque at 2 × rated. For continuous heavy duty, apply a service factor of 1.5–2.
| Ratio | Rated N·m | Peak |
|---|---|---|
| 9 / 12 / 15 / 30 | 65 | 2 × rated |
| 16 / 20 / 28 / 40 | 93 | 2 × rated |
| 25 / 35 / 50 | 100 | 2 × rated |
| 70 | 71 | 2 × rated |
| 100 | 45 | 2 × rated |
Outline and dimensions
This drawing is the 80 flange, stage 2 L2. The input is a clamp hub. Shaft extension, keyway, and pilot follow the selected motor. Include the motor model with the order.
The 3D model is for mechanism pre-assembly. Pilot and shaft extension follow the dimensions shipped with the unit.
Order code
The order code is the series plus the ratio, without the flange: PF9 / PF15 / PF20 / PF30 / PF50 / PF70 / PF100. Full string example: XR-Online-MSP750-C-2M-PF30.
With the order, send the drive and motor model, target output speed, load torque, and whether a brake is required. The input clamp bore must match the motor shaft.
Related pages
- Planetary gearbox overview
- Worm gearbox
- XMatrix functions × MSP hardware — how the ratio is applied