Applications and engineering start
This page does not use customer names or project data that have not been cleared for publication. It describes problems the published XMSP capability can address, and it points to material you can check directly.
Judge fit from the control method
Final model, axis count, and performance limits have to be checked against the real duty.
General machine automation
Your conditions: You need sequenced moves, positioning, homing, limits, or a push-button or I/O trigger, and you do not want to start from a PLC ladder and motor-control code.
XMSP path: XMatrix Online or Offline, with an MSP integrated stepper drive or an MSP integrated servo drive.
Stage and kinetic display
Your conditions: A lighting console, media software, or a show-control system needs to command motor position and speed.
XMSP path: XMatrix DMX512 Interface. Choose stepper, servo, or MSP1001 in front of a third-party drive, according to the motor.
See the DMX512 interface · Ask with channel count and axis count
Host software and intelligent equipment
Your conditions: You already have a program, and it needs to call motion and read device status.
XMSP path: Use the XMatrix Command Interface or the API-SDK, and connect the MSP hardware to the software you already have.
See the command interface · See the API-SDK · Ask with the language and axis count
An existing third-party drive, or a non-standard motor
Your conditions: A stepper or servo drive is already on site, or the motor is outside the standard direct-drive range.
XMSP path: MSP1001 connects a third-party drive through a 5 V direction / pulse interface, and the axis stays inside the XMatrix software system.
Engineering starting points
Only published pages, and documents available on request, are listed here.
XMatrix Online, first move
From the hardware configuration and matrix mapping to the first cue.
Compare the three controllers
Filter hardware by motor, power, supply, and output interface.
NPN 24 V sensor notes
Wiring reference for home and limit sensors.
Accessories and matching parts
Sensors, rail stages, gearboxes, and leadscrews are selected as required. Cables are cut to length.
Contact
Company profile and the business WeChat QR code.
From the motor on site and any drive already installed, choose direct-drive stepper, direct-drive servo, or MSP1001.
Stepper, servo, and third-party drives can be mixed by axis, and they share the XMatrix software system.
Choose Online, Offline, Command Interface, DMX512 Interface, API-SDK, or OEM for the project.